首页
以下仪器设备中,可用于提供输入信号的是
精华吧
→
答案
→
知到智慧树
→
未分类
以下仪器设备中,可用于提供输入信号的是
A.函数信号发生器
B.DC信号源
C.示波器
D.交流毫伏表
正确答案:函数信号发生器;DC信号源
Tag:
信号源
函数
信号发生器
时间:2024-01-15 10:34:30
上一篇:
信号的三要素是幅值、周期和初相位。
下一篇:
总体来说,函数信号发生器的功能有
相关答案
1.
An amplifier has a gain-bandwidth product of 200 MHz.A feedback network is added that has a feedback factor(1 + βA) of 18.88.What is the gain-bandwidth product for the circuit with the added feedback network?()
2.
The output impedance of current-shunt feedback amplifier();the output impedance of its op-amp.
3.
Calculate the voltage gain for voltage series feedback when the amplifier gain is A = -2000 and F = -1/50.()
4.
The feedback circuit connection shown here is().
5.
The power that an amplifier delivers to a load is equal to the difference between the power that the circuit draws from the power supply and the power that the circuit dissipates.()。
6.
Power amplifiers are typically used to drive low impedance loads.()。
7.
The maximum theoretical efficiency of an RC-coupled class A amplifier is().
8.
Crossover distortion in class B amplifiers is prevented by().
9.
A class B amplifier(not push-pull)().
10.
An active filter that provides a constant output for input signals above
热门答案
1.
A second order low-pass filter has a high-end roll-off of().
2.
A summing integrator is an op-amp integrator that has().
3.
If the input voltage is 0.25 V and the output is -2.5 V, the value of must be().
4.
The bandwidth of an amplifier is().
5.
When a given op-amp has a common-mode input of 10 V, the output of the device is 10 V.;When the device has a differential input of 2 mV, the output of the device is 10 V.What is the CMPR of the device?()
6.
The inverting and noninverting inputs to an op-amp are used to drive a(n)()amplifier.
7.
The operational amplifier will only slightly amplify signals().
8.
Under difference-mode operation, the difference-mode voltage gain for this circuit is().
9.
An amplifier has a midband power gain of 24,500.What is the value of the power gain in dB for the circuit?()
10.
Negative dB values represent().