If the input voltage is 0.25 V and the output is -2.5 V， the value of must be（）._精华吧

If the input voltage is 0.25 V and the output is -2.5 V， the value of must be（）.

精华吧→答案→知到智慧树→未分类

If the input voltage is 0.25 V and the output is -2.5 V， the value of must be（）.

A.40.0 kΩ

B.20.0 kΩ

C.16.0 kΩ

D.5.0 kΩ

正确答案：20.0 kΩ

Tag：时间：2024-01-15 10:34:17

上一篇：The bandwidth of an amplifier is（）.
下一篇：A summing integrator is an op-amp integrator that has（）.

相关答案

1.When a given op-amp has a common-mode input of 10 V， the output of the device is 10 V.；When the device has a differential input of 2 mV， the output of the device is 10 V.What is the CMPR of the device？（）
2.The inverting and noninverting inputs to an op-amp are used to drive a（n）（）amplifier.
3.The operational amplifier will only slightly amplify signals（）.
4.Under difference-mode operation， the difference-mode voltage gain for this circuit is（）.
5.An amplifier has a midband power gain of 24，500.What is the value of the power gain in dB for the circuit？（）
6.Negative dB values represent（）.
7.If several identical stages of amplifiers， each having the exact same upper and lower cutoff frequencies， are connected in cascade， then the bandwidth of the resulting amplifier will（）.
8.The（）；FET amplifier has low input impedance， high output impedance， and high voltage gain.
9.The（）；amplifier has high input impedance， low output impedance， and low voltage gain.
10.The FET version of the BJT'；s common-emitter configuration is the（）circuit.

热门答案