The（）；FET amplifier has low input impedance， high output impedance， and high voltage gain.
The（）；FET amplifier has low input impedance， high output impedance， and high voltage gain.
A.common-gate
B.common-drain
C.common-source
正确答案：common-gate
Tag：
时间：2024-01-15 10:34:09
相关答案
- 1.The FET version of the BJT'；s common-emitter configuration is the（）circuit.
- 2.A JFET can be biased in several different ways.The common method（s） of biasing an n-channel JFET is（are）（）.
- 3.The primary difference between JFETs and depletion-type MOSFETs is（）.
- 4.Which of the following biasing circuits can be used with E-MOSFETs？（）
- 5.Generally， it is good design practice for linear amplifiers to have operating points that close to（）.
- 6.This graphical solution represents（）.
- 7.FETs usually（）.
- 8.In the family of FETs， you can expect to find（）.
- 9.The region of the JFET drain curve that lies between pinch-off and breakdown is called（）.
- 10.Shockley'；s equation defines the（）of the FET and are unaffected by the network in which the device is employeD.
热门答案
- 1.The voltage gain of a very well-designed common collector amplifier configuration， using a pnp transistor， is（）.
- 2.A transistor amplifier has an input signal applied to its emitter terminal and an output signal taken from its collector terminal.The amplifier is a（n）（）.
- 3.Calculate the voltage gain for this circuit.（）
- 4.The transistor model replaces the（）；with the junction diode's ac resistance.
- 5.Given this configuration， determine the input impedance if VS = 40 mV， Rsense = 0.5 kΩ， and the input current is 20 μA.（）
- 6.Voltage-divider bias stability is（）.
- 7.The term quiescent means（）.
- 8.The difference between the resulting equations for a network in which an npn transistor has been replaced by a pnp transistor is（）.
- 9.Calculate the collector-emitter voltage for this emitter-stabilized circuit.（）；
- 10.When a BJT is biased in the cutoff region the collector-to-emitter voltage is typically equal to（）.