The operational amplifier will only slightly amplify signals（）.
The operational amplifier will only slightly amplify signals（）.
A.when the supply voltages are more then ±25 V
B.when the supply voltages are less then ±5 V
C.that are common on both the inputs
D.that are different on both the inputs
正确答案：that are common on both the inputs
Tag：
时间：2024-01-15 10:34:14
相关答案
- 1.An amplifier has a midband power gain of 24，500.What is the value of the power gain in dB for the circuit？（）
- 2.Negative dB values represent（）.
- 3.If several identical stages of amplifiers， each having the exact same upper and lower cutoff frequencies， are connected in cascade， then the bandwidth of the resulting amplifier will（）.
- 4.The（）；FET amplifier has low input impedance， high output impedance， and high voltage gain.
- 5.The（）；amplifier has high input impedance， low output impedance， and low voltage gain.
- 6.The FET version of the BJT'；s common-emitter configuration is the（）circuit.
- 7.A JFET can be biased in several different ways.The common method（s） of biasing an n-channel JFET is（are）（）.
- 8.The primary difference between JFETs and depletion-type MOSFETs is（）.
- 9.Which of the following biasing circuits can be used with E-MOSFETs？（）
- 10.Generally， it is good design practice for linear amplifiers to have operating points that close to（）.
热门答案
- 1.This graphical solution represents（）.
- 2.FETs usually（）.
- 3.In the family of FETs， you can expect to find（）.
- 4.The region of the JFET drain curve that lies between pinch-off and breakdown is called（）.
- 5.Shockley'；s equation defines the（）of the FET and are unaffected by the network in which the device is employeD.
- 6.The voltage gain of a very well-designed common collector amplifier configuration， using a pnp transistor， is（）.
- 7.A transistor amplifier has an input signal applied to its emitter terminal and an output signal taken from its collector terminal.The amplifier is a（n）（）.
- 8.Calculate the voltage gain for this circuit.（）
- 9.The transistor model replaces the（）；with the junction diode's ac resistance.
- 10.Given this configuration， determine the input impedance if VS = 40 mV， Rsense = 0.5 kΩ， and the input current is 20 μA.（）