Negative dB values represent（）.
Negative dB values represent（）.
A.power gain
B.power losses
C.power values that do not change
正确答案：power losses
Tag：
时间：2024-01-15 10:34:11
- 上一篇：If several identical stages of amplifiers， each having the exact same upper and lower cutoff frequencies， are connected in cascade， then the bandwidth of the resulting amplifier will（）.
- 下一篇：An amplifier has a midband power gain of 24，500.What is the value of the power gain in dB for the circuit？（）
相关答案
- 1.The（）；FET amplifier has low input impedance， high output impedance， and high voltage gain.
- 2.The（）；amplifier has high input impedance， low output impedance， and low voltage gain.
- 3.The FET version of the BJT'；s common-emitter configuration is the（）circuit.
- 4.A JFET can be biased in several different ways.The common method（s） of biasing an n-channel JFET is（are）（）.
- 5.The primary difference between JFETs and depletion-type MOSFETs is（）.
- 6.Which of the following biasing circuits can be used with E-MOSFETs？（）
- 7.Generally， it is good design practice for linear amplifiers to have operating points that close to（）.
- 8.This graphical solution represents（）.
- 9.FETs usually（）.
- 10.In the family of FETs， you can expect to find（）.
热门答案
- 1.The region of the JFET drain curve that lies between pinch-off and breakdown is called（）.
- 2.Shockley'；s equation defines the（）of the FET and are unaffected by the network in which the device is employeD.
- 3.The voltage gain of a very well-designed common collector amplifier configuration， using a pnp transistor， is（）.
- 4.A transistor amplifier has an input signal applied to its emitter terminal and an output signal taken from its collector terminal.The amplifier is a（n）（）.
- 5.Calculate the voltage gain for this circuit.（）
- 6.The transistor model replaces the（）；with the junction diode's ac resistance.
- 7.Given this configuration， determine the input impedance if VS = 40 mV， Rsense = 0.5 kΩ， and the input current is 20 μA.（）
- 8.Voltage-divider bias stability is（）.
- 9.The term quiescent means（）.
- 10.The difference between the resulting equations for a network in which an npn transistor has been replaced by a pnp transistor is（）.