Whe two adjacent part are cut， the hatching direction shall be reverese._精华吧

Whe two adjacent part are cut， the hatching direction shall be reverese.

精华吧→答案→知到智慧树→未分类

Whe two adjacent part are cut， the hatching direction shall be reverese.

A.正确

B.错误

正确答案：正确

Tag：时间：2024-01-14 20:13:20

上一篇：What is the diameter relationship between hole and bolt？
下一篇：In screw joint， the end line should be drawn at the position of

相关答案

1.what does the 6 mean in symbol of washer GB/T 97.1-2002 6
2.what does M， Tr， R mean respectively in thread marks？
3.What does LH mean in thread marks？
4.When a inclined cutting plane is used， the inclined sectional view can be rotated at an angle of less than 45°.
5.When a cutting plane pass through the symmetric position， the labeling location symbols can be omitteD.
6.The position of labeling the name letters for a sectional view should be above its view。
7.When a cutting plane pass through symmetric position of a rib， there should be no hatching on the area of the rib.
8.The cut is represented only on the croosection， but the section is represented for all the visible outlines。
9.The arrow head can be omitted when the cut structure is symmetry，。
10.Superposition cut is represented as thick line and is put inside the original view。

热门答案