首页
PID是()的简称。
精华吧
→
答案
→
慕课
→
未分类
PID是()的简称。
A.管道仪表流程图
B.方框流程图
C.工艺物料流程图
D.工艺流程草图
正确答案:管道仪表流程图
Tag:
化工设计概论
流程图
管道
时间:2022-01-28 20:12:00
上一篇:
Cementite is much harder but more brittle than ferrite.
下一篇:
PFD是()的简称。
相关答案
1.
Martensite will appear on the iron-iron carbide phase diagram.
2.
In the iron-carbide phase diagram, when at the temperatures above the eutectoid and for all times, only austenite will exist.
3.
Temperature plays an important role in the rate of the austenite-to-pearlite transformation.
4.
The first process to accompany a phase transformation is nucleation.
5.
δ-ferrite is stable only at relatively high temperatures.
6.
In practice, not all steels and case irons have carbon contents less than 6.7 wt% C.
7.
α iron has a BCC crystal structure.
8.
Of all binary alloy systems, the one that is possibly the most important is that for iron and carbon.
9.
For all temperatures and compositions below the melting temperature of the lowest melting component, only a single solid phase will exist.
10.
We don’t have to employ the tie line if two phases are present.
热门答案
1.
From the previous example for the 60 wt%Ni-40 wt% Cu alloy at 1100℃, only the α phase is present.
2.
When two phases are present in a system, it is necessary that there will be a difference in both physical and chemical properties.
3.
Sugar-water syrup solution and solid sugar are different phases.
4.
Every pure material is considered to be a phase.
5.
The microstructure that develops in iron-carbon alloys depends on().
6.
The form of iron-carbon phase can be divided into().
7.
For a binary system of known composition and temperature, that is at equilibrium, at least three kinds of information are available.
8.
自由能主要由哪些因素决定?
9.
贝氏体的微观结构由()和()组成。
10.
The thickness ratio of the ferrite and cementite layers in pearlite is approximately().