首页
一般钢淬火后,还要经过()热处理
精华吧
→
答案
→
慕课
→
未分类
一般钢淬火后,还要经过()热处理
A.退火
B.正火
C.回火
D.表面气体渗碳
正确答案:回火
Tag:
工程材料基础
正火
渗碳
时间:2022-01-14 13:57:05
上一篇:
共析钢加热到750℃,然后退火获得的组织为()
下一篇:
T8钢淬火加热的合适温度约为()
相关答案
1.
使弹簧钢获得高弹极限时,热处理工艺选择()
2.
共析钢加热形成奥氏体的过程分成四步,其中第四步是
3.
高碳钢或高碳合金钢在淬火后,为减少残留奥氏体量、提高硬度,常进行
4.
共析钢等温冷却转变图中鼻尖的温度为
5.
共析钢的过冷奥氏体在A1~650℃之间进行等温转变时的转变产物为()
6.
在Fe-Fe3C相图中,碳钢的共析线,也称为()
7.
珠光体加热过程中两相转变成的奥氏体的速率()
8.
共析碳钢奥氏体连续冷却转变图(CCT)位于等温转变图(CT)的()
9.
奥氏体中溶解碳的质量分数是固定的,为2.11wt.%
10.
晶界比晶粒本身容易被腐蚀和氧化
热门答案
1.
Cr,Mo,W,V金属都属于体心立方结构
2.
Cu,Al,Ag,Au金属都属于面心立方结构
3.
晶格常数共包括晶胞的棱边长度a,b,c三个参数
4.
金属实际开始结晶温度也就是其理论结晶温度
5.
固溶体中溶质原子位于晶格的间隙位置
6.
强度,硬度与塑韧性是一对矛盾,所以当强度,硬度升高时,塑韧性一定下降
7.
工业纯铁中含有少量的碳元素
8.
铁素体和奥氏体的根本区别在于它们的溶碳能力不同,前者少,后者多
9.
实际(宏观的)块状金属在不同的方向上的性能是一样的
10.
多晶体材料都是多相材料